并离网逆变器_高频UPS电源定制_户用储能光伏逆变器厂家-深圳市索克新能源

         With the rapid development of medical technology, medical equipment is constantly updated, and some high, fine and sharp equipment should be used in clinic more and more. These advanced devices have increasingly high requirements for power supply systems, and various sensitive electronic components in the equipment need continuous and stable power supply. In particular, some imported equipment, which are designed in accordance with international standard power grid environmental indicators, can work normally within the scope of the standard power grid, with less failure and long life. However, under the condition of our power grid, there will be unstable work, high failure rate, shortened life and so on. The main reason is that there are many unstable factors in the public power system in our country. For example, the power grid voltage is sometimes high, low, surge, impact and sudden interruption, which seriously affects the safe operation of medical equipment, and even damages the equipment and causes serious economic losses. Therefore, the UPS(Uninterruptible power system  The use of uninterruptible power supply (uninterruptible power supply) has become the key to protect important equipment, and most hospitals are equipped with corresponding UPS for some of the more important equipment.

         My company launched the needle above the current situation of the program

         Such as: This power frequency online ups is very suitable for medical systems

         And this high capacity regulated power supply for medical systems

         Product characteristics

         High quality power supply

         The power frequency series UPS is an online double conversion (VF1) UPS, which can filter and stabilize the sinusoidal output voltage, and this special input and output filtering can effectively combat any interference to the power supply.

High reliability and power supply

           In general, reducing the number of electronic components can reduce the corresponding system failure, and the use of digital control equipment, can greatly improve its reliability, CP series power frequency UPS by the microprocessor digital control of the built-in parameters, can effectively improve reliability, and optimize the operation, in the parallel connection, the current due to vibration or temperature changes may produce imbalances, The digital control technology of power frequency series UPS, without manual adjustment, can maintain the current balance of UPS information interaction.

           Power frequency system UPS design retains a considerable amount of adjustment space, allowing for parallel or different configurations at any time, using parallel configuration, dual bus function and dynamic dual bus system can greatly improve the power supply.

High efficiency and low cost

         UPS for the user needs, can use the energy-saving mode operation, efficiency of up to 98%, in the energy-saving mode, the mains power priority, when the mains exceeds the preset value, the load is switched to the inverter, can greatly reduce energy waste, reduce costs.

Suitable for industrial loads

         UPS has the characteristics of strong overload capacity, high output isolation, and low current harmonic distortion, making it the best choice for industrial applications.

         UPS is a high-current charging system for large battery packs that can be charged in as little as 10 hours, as recommended by the battery manufacturer.

Personalized operation interface

         The UPS uses an analog screen to operate, simple and novel, and the analog screen can provide the most important parameters, such as: Status and alerts, control commands, input, output, battery data, (power, current, voltage, frequency and temperature) and other Settings, the diagnostic system includes up to 128 different alarms and/or messages, providing accurate and detailed information on any possible failure.

Flexible operation

         The UPS is an online dual-conversion uninterruptible power supply that can operate in online interactive mode. In addition, N+1 has a maximum parallel expansion of 32,000 kW and eight parallel machines.

It has: 1.  The main circuit adopts compensation structure - large power capacity

                    2.  Output waveform without additional distortion - good load characteristics

                    3.  Adjustable voltage output accuracy - easy to use

                    4.  Voltage regulator bypass is convertible - easy to maintain

                    5.  Comprehensive fault protection system - safe and reliable